IKA A11 basic analytical mill

General description

IKA^® A11 Basic Analytical MillBatch mill for 2 different grinding procedures:Impact grinding of hard, brittle or non-elastic grinding materials with high-grade stainless steel beater. This beater can be used for a Mohs hardness up to 6 (included with delivery). Cutting grinding for pulverizing soft, fibrous materials with a cutting blade (not incl. with delivery; Z630004) Moist and/or sticky materials can be pulverized by adding water Grinding chamber made of Tefcel (PTFE, glass fiber-reinforced) with stainless steel inlet (1.4571), useful volume 80 mL (included with delivery). For embrittlement of grinding materials with liquid nitrogen in the grinding chamber Optionally, a 250 mL grinding chamber (Z341797) is available Process type: batch Operating principle: cutting/impact Motor rating input: 160 W Motor rating output: 100 W Speed max.: 28,000 rpm Circumferential speed max.: 53 m/s Usable volume max.: 80 mL Feed hardness max.: 6 Mohs Feed grain size max.: 10 mm Material beater/cutter: stainless steel 1.4034 Material milling chamber: stainless steel 1.4571 Power-on time: ON 1 min Power-off time: OFF 10 min Milling chamber, can be cooled with water: no Mill feed can be cooled in milling chamber with dry ice: yes Mill feed can be cooled in milling chamber with liquid nitrogen: yes Dimensions: (W x H x D): 85 x 240 x 85 mm Weight: 1.5 kg

Legal Information

IKA is a registered trademark of IKA-Werke GmbH & Co. KG